Orbegozo TF 0319 handleiding
Handleiding
Je bekijkt pagina 10 van 29
TF 0319
10
same quality by the manufacturer or our customer
service department.
Only use original accessories.
Mounting
Clip fan: No assembly required.
Table Fan: Attach the base by matching the tabs in the recess on the base with the
indentations on the front of the clip. Insert until you hear a click.
Wall fan: No fan assembly required. Drill a hole in the wall where you want to place the fan
and insert a wall plug suitable for your type of wall, then insert a screw or wall anchor. Hang
the fan by inserting the chosen anchoring system through the hole in the clamp base.
Note: To remove the fan base for use with a clip, press the tab on the bottom of the base until
the clip is released.
Utilization
1. Adjust the speed: The switch (0-1-2) controls the speed, off, low, or high respectively.
2. Tilt Adjustment: To adjust the tilt angle of the fan, loosen the lever that connects the fan head to
the clamp hook, choose the desired position and tighten the lock again.
3. Auto Oscillation: To turn the fan's automatic oscillation on or off, press or lift the tab on the top
of the fan head.
Care, cleaning and maintenance
Blades and louvers should be cleaned regularly for best performance. Unplug the fan to
remove the blades and louvers before cleaning. Wipe with a damp cloth and dry with a dry
towel.
Never immerse any part in water. Only clean the fan with a damp cloth, then dry it
immediately with a dry towel.
Lubricate the motor shafts with multi-purpose oil to ensure proper operation.
Always store your fan in a cool, dry place.
Bekijk gratis de handleiding van Orbegozo TF 0319, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Orbegozo |
| Model | TF 0319 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 2458 MB |
