Orbegozo SF 0441 handleiding
Handleiding
Je bekijkt pagina 10 van 23
SF 0441
10
DESCRIPTION
INSTALLATION INSTRUCTIONS
1. Install the tube (10) on the base (12) and tighten it with the screw at 7 (13). Choose the desired height of
the inner tube and adjust it by tightening the height adjustment ring (11).
2. Insert the inner tube (10) into the fan body and tighten the screw (9) so that it is fixed to the post.
3. Place the rear grille (5) on the front of the engine. Tighten the plastic nut (4) to secure the grille. Insert
the blade (3) into the motor shaft and screw on the spinner (2). Place the retaining ring on the front
grille (1) and then join the two grilles together using it. Tighten the retaining ring screw so that both
grilles are secure.
FUNCTIONING
- BUTTON PANEL (4 BUTTONS)
From top to bottom:
3. High Speed
2. Average Speed
1. Low Speed
0. Shut down
1.
Front grille
2.
Drawer
3.
Blades
4.
Nut
5.
Rear grille
6.
gear button
7.
motor casing
8.
Button panel
9.
Tightening screw
10.
inner tube
11.
Height adjustment ring
12.
Base
13.
7 screw
Bekijk gratis de handleiding van Orbegozo SF 0441, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Orbegozo |
| Model | SF 0441 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 2542 MB |
