Handleiding
Je bekijkt pagina 25 van 65
PHE 86
|
25
STEP 5
Place the cylinder inside the cylindrical housing and connect the gas regulator. Secure the cylinder with the strap
inside the housing to prevent it from tipping over.
CLEANING AND MAINTENANCE
Clean dust from surfaces with a mild cloth. Do not use corrosive or flammable cleaning products.
Cover the stove with an optional cover when the stove is not in use.
TROUBLESHOOTING
PROBLEM
PROBABLE CAUSE
SOLUTION
The pilot light does not light
Gas valve closed
Empty cylinder
Opening blocked
Air in the ducts
Loose connections
Turn on the gas
Change the cylinder
Clean or open the opening
Purge the air
Check connections
The pilot light does not stay lit
Impurities in pilot tube
Loose connections
Faulty thermocouple
Gas leak
Low gas pressure
Cleanse impurities
Check the connections
Replace the thermocouple
Check the connections
Check that there is gas in the
cylinder
The burner does not light
Low pressure
Opening blocked
Control not in ON position
Faulty thermocouple
Pilot light bent or in incorrect
position
Empty cylinder. Replace.
Clean and open aperture
Put the control in the ON position
Replacing the thermocouple
Place the pilot in the correct
position and try again.
Bekijk gratis de handleiding van Orbegozo PHE 86, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Orbegozo |
| Model | PHE 86 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 8718 MB |
