Orbegozo CP 143142 handleiding
Handleiding
Je bekijkt pagina 22 van 60
CP 143142
22
BALANCING KIT
If there is any movement after the ceiling fan is installed,
confirm whether the screws fixing the suspension ball, ceiling
bracket, blade bracket and blade are tight. If one of the above
parts is not fastened tightly, re-fix it. If it is properly fixed,
proceed as follows.
6. Change the position of the fan blades:
If there is no improvement after changing the blade position,
remove blades 2 and 3 from the fan and exchange them with
each other to observe the effect.
7. Adjustment with the balance kit.
A. Take out the balance bag from the package box, use a balance clamp to select one of
the fan blades, and clamp the balance clamp on the edge of the rear end of the fan
blade.
B. Turn on the fan switch to see if the ceiling fan's movement has been reduced. If it
doesn't improve, try a different fan blade. Experiment with all the fan blades in turn to
find the blade with the weakest holding balance.
C. Place the balance clamp on the fan blade with the weakest oscillation, move it inward
or outward on the edge of the fan blade, turn on the ceiling fan to find the best position
of the balance clamp to control the oscillation balance.
D. Take the balance weight, peel off the double-sided tape on the weight, and stick it in
the center of the paddle at the position of the balance clip.
Bekijk gratis de handleiding van Orbegozo CP 143142, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Orbegozo |
| Model | CP 143142 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 10651 MB |
