Orbegozo CP 142060 handleiding
Handleiding
Je bekijkt pagina 20 van 57
CP 142060
20
MOUNTING THE BOWL
Mount the bowl by tightening the two screws
FAN BALANCING
Please note that all ceiling fans are not created equal, even within the same model!
Some may move more or less than others. Movement of a couple of centimeters is quite
acceptable and does not result in the fan falling.
Although all blades are weighted and grouped by weight, it is impossible to eliminate wobble
completely. This should not be considered a problem. Ceiling fans tend to move during
operation because they are generally not rigidly mounted.
BALANCING KIT
If there is any movement after the ceiling fan is installed, please confirm whether the screws
fixing the suspension ball, ceiling bracket, blade bracket and blade are tight. If one of the above
parts is not tight, please re-fix it. If it is properly fixed, please proceed as follows.
1. Change the position of the fan blades:
If there is no improvement after changing the blade position, remove blades 2 and 3 from the
fan and exchange them with each other to observe the effect.
2. Adjustment with the balance kit.
A. Take out the balance bag from the package box, use a balance clamp to select one of
the fan blades, and clamp the balance clamp on the edge of the rear end of the fan blade.
B. Turn on the fan switch to see if the ceiling fan's movement has been reduced. If it
doesn't improve, try a different fan blade. Experiment with all the fan blades in turn to
find the blade with the weakest holding balance.
C. Place the balance clamp on the fan blade with the weakest oscillation, move it inward
or outward on the edge of the fan blade, turn on the ceiling fan to find the best position
of the balance clamp to control the oscillation balance.
Bekijk gratis de handleiding van Orbegozo CP 142060, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Orbegozo |
| Model | CP 142060 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 10546 MB |
