Orbegozo CP 140105 handleiding
Handleiding
Je bekijkt pagina 13 van 48
CP 138105 CP 140105
13
14. WARNING: In case of misuse, there is a risk of
possible injury.
Other specific precautions
1. The disconnecting means that must be
incorporated into the fixed installation, for its
omnipolar disconnection from the power supply
network, must have a contact separation of at
least 3 mm in all poles.
2. Make sure that the installation location allows the
fan blade to rotate freely. The blade must be at
least 2.30 m above the ground once installed.
3. If you are going to install more than one fan,
make sure not to mix the blades of the propellers
of different fans, even if they are the same model.
4. Before you start working on the electrical
network, remove the fuses or turn off the main
power switch.
5. After installing the fan, make sure all fixings are
correct to prevent the fan from falling.
6. The fan must be turned off and stopped before
changing the direction of rotation.
7. Check that the fixing point of the appliance is
capable of supporting the weight of the moving
fan (minimum 50 kg).
Bekijk gratis de handleiding van Orbegozo CP 140105, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Orbegozo |
| Model | CP 140105 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 7064 MB |
