Handleiding
Je bekijkt pagina 12 van 35
BV 15300 / 15350
12
Important: Your blender jar and cutting blades are subject to wear during normal use. Always inspect
cutting blades for broken, cracked or loose blades. If jar-cutting blades are damaged, do not use.
1. Make sure blender is unplugged. Place blender base on clean, dry
surface.
2. Place the jar on the motor unit. To do this, fit the jug with the body
leaving the handle to the right and turning it until it gets locked.
This blender is fitted with a safety device that stops the motor
from starting if the jar is not positioned correctly. The blade
assembly must be screwed into the jar firmly. If not, it may loosen
when the motor is turned on.
3. Peeled or cored the fruit or vegetables and then cut it into small
dices, put the food piece into the jar. Usually certain amount of
purified water has to be add to facilitate the smooth running of
appliance. The amount of mixture should not exceed the max level as indicated on the jar. Process
food or beverages. Place hand on lid when blending liquids. Note: never use boiling liquid or run
the appliance empty.
4. Replace the jar cover on the jar.
5. You may add ingredient into the jar through the center opening of jar cover during operation, then
close the measuring cup if necessary. Note: the measuring cup can only be opened by pressing the
end with the mark of push, but never remove out.
6. Connect the plug to wall outlet and set speed control to your desired setting. You can turn the
speed control to the P position if want to accelerate the process of blending. The detailed
information of speed control. The motor can work continuously for 3 minutes. After that it have
to be off for 10 minutes.
7. Turn the speed control to 0 position once the mixture has been blended to your desired consistency.
8. Remove the jar from the motor unit, carefully take down the jar covert, then pour and serve.
9. If you have to stir in food that us tuck to the sides of the jug, then switch the appliance off first. The
blades may continue to rotate for a moment longer. Keep spoons or spatulas a good distance away
from the blades to avoid accidents. Always turn blender OFF and wait until blades have stopped
rotating before removing jar.
10. Never place jar onto unit while motor is running.
Speed
Speeds are 1, 2 and P. P is a controlled cycle operation. This means it operates only while the button is held
down. All other speeds are continuous cycle operate continuously at whatever speed is selected until turn
the knob to the right.
For continuous operation
Rotate the knob to desire speed setting to turn blender on.
Bekijk gratis de handleiding van Orbegozo BV 15300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Orbegozo |
| Model | BV 15300 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 3587 MB |
