Optex TI-S handleiding
Handleiding
Je bekijkt pagina 6 van 148
iv
Caution
Use the dedicated cable for connecting the sensor head to the controller.
Use of anything other than the dedicated cable may cause a malfunction or damage the product.
Do not excessively twist or apply stress to the cable.
Doing so may damage the cable or the connector.
When connecting the cable, make sure to hold it by the connector portion, and do not
apply excessive force to the cable.
When disconnecting the connector, be careful not to touch the terminals inside the
connector, and do not allow foreign objects to enter the connector.
Route wiring separately from high-voltage circuits and power circuits.
If the wires are routed together, induction may occur, which can cause a malfunction or damage
the product.
If this is unavoidable, use a conductive object such as a properly grounded conduit as a shield.
Install this product as far away from high-voltage equipment, power equipment, equipment
that generates large switching surges, welders, inverter motors, or any equipment
that can be a source of noise.
Use this product within the rated ranges.
Install this product securely.
Failure to ensure secure installation can result in the products falling and becoming damaged.
Make sure to turn the power off before wiring the cable or connecting/disconnecting
the connector. Performing work while the product is energized may damage it or cause
electric shock.
NOTICE
• After carefully considering the intended use, required specifications, and usage conditions, install and use
the product within the specified ranges.
• All specifications may be changed without notice.
• When using this product, it is the responsibility of the customer to ensure necessary safety designs in
hardware, software, and systems in order to prevent any threat to life, physical health, and property due to
product malfunction or failure.
• Do not use this product for the development of weapons of mass destruction, for military use, or for any
other military application. Moreover, if this product is to be exported, comply with all applicable export laws
and regulations, including the “Foreign Exchange and Foreign Trade Act” and the “Export Administration
Regulations,” and carry out the necessary procedures pursuant to the provisions therein.
• If installing this product in your own equipment, ensure that the product is properly handled according to
the laws and regulations of the relevant country or region.
Bekijk gratis de handleiding van Optex TI-S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Optex |
| Model | TI-S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14359 MB |