Omnitronic XO-230 handleiding
Handleiding
Je bekijkt pagina 18 van 20
18
•
EN
6
66
6
Technical Specifications
XO-230
Power supply: 230 V AC, 50 Hz
Power consumption: 20 W
Operation modes: 2-way stereo or 3-way mono
Inputs: XLR, electronically balanced/unbalanced, RF filtered
Impedance: balanced >50 kΩ, unbalanced>25 kΩ
Max. input level: +22 dBu typical, balanced or unbalanced
Outputs: XLR, electronically balanced/unbalanced, RF filtered
Impedance: balanced 200 Ω, unbalanced 100 Ω
Max. output level: >+21 dBu balanced/unbalanced into 2 kΩ or greater
S/N ratio: >100 dB
THD: 0.05%
Crosstalk: >80 dB, -3 dB
Crossover frequencies stereo mode:
Low/high 45 Hz to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Crossover frequencies mono mode: Low/mid 45 Hz to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Mid/high 450 Hz to 9.6 kHz
Filter type: Linkwitz-Riley, 24 dB/octave, state-variable
Function switches:
Low Cut: 40 Hz Butterworth, 12 dB/octave high-pass filter
Phase Invert: inverts the phase at the corresponding output
Mode: selects stereo or mono operation
LF Sum selects stereo bass or mono-summed bass operation
x10: multiplies crossover frequency range by 10
Indicators: stereo operation (green), mono operation (yellow), low cut (red, per
channel), p18-x10 (green, per channel), phase invert (red, per output)
Input gain: ±12 dB
Output gain: - ~ to + 6 dB
Dimensions (WxDxH): 483 x 152 x 48 mm
Weight: 1.8 kg
Specifications are subject to change without notice due to product improvements.
Connector configuration
2
1
3
1
2
3
BalancedusewithXLRconnectors
1=Ground/Shield
2=Hot(+)
3=Cold(-)
Forunbalancedusepin1andpin3havetobebridged
Input Output
Bekijk gratis de handleiding van Omnitronic XO-230, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Omnitronic |
| Model | XO-230 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3650 MB |
