Omnitronic PAS-215A MK4 handleiding
Handleiding
Je bekijkt pagina 25 van 28
25
•
EN
Setting up a Bluetooth link between two PAS speaker systems
The integrated TWS (True Wireless Stereo) function allows two PAS speaker systems to be paired via
Bluetooth. The left and right audio channels are played back separately and without delay in stereo via both
PA systems.
1) Pair the Bluetooth source with the first speaker system as described before.
2) Then press the TWS button on both speaker systems for 1 second. The TWS status indicators start
flashing and light up permanently as soon as the devices are paired. In addition, the PAIR status
indicator on the first speaker system lights up and remains off on the second speaker system. The sound
will come out of both speaker systems in stereo.
3) For decoupling the devices, press the TWS button on either of the speaker systems. Pressing the button
again restores the TWS connection.
7
Cleaning and Maintenance
We recommend a frequent cleaning of the PA speaker system. Disconnect the device from power before
cleaning. Please use a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
If the speaker system distorts, one of the loudspeakers may be defective. In this case the PA system should
not be operated any more in order to prevent further damage. Please contact your dealer. If clacking sounds
are heard from the speaker system, screws may have loosened due to the continuous vibrations. The
speaker system should be checked by a specialist.
There are no serviceable parts inside the device except for the fuse with model BOB-10A. Maintenance and
service operations are only to be carried out by authorized dealers. Should you need any spare parts, please
use genuine parts. If the power supply cable of this device becomes damaged, it has to be replaced by a
special power supply cable available at your dealer. Should you have further questions, please contact your
dealer.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating. Before
replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing.
Bekijk gratis de handleiding van Omnitronic PAS-215A MK4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Omnitronic |
| Model | PAS-215A MK4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5619 MB |
