OmniMount SC130T handleiding
Handleiding
Je bekijkt pagina 8 van 20
8
1. ATTACHING THE TV VESA BRACKETS TO THE TV
Using a Phillips screw driver attach the TV VESA brackets to the TV. Because this mount was designed to t a number of TV
con gurations, we’ve included a variety of screws and spacers. You will only be using 4 screws in this installation step. Spacers
may be needed to accommodate TVs with a curved back, recessed mounting locations, or in the event that one of the TV VESA
brackets obstructs the power or signal plug outlets. Spacers may also be mounted behind the TV VESA brackets to take up
additional slack. Now is also an opportune time to plug in all of your power and signal cables into the TV.
WARNING: WHEN USING INCLUDED M4 HARDWARE WITH THIS MOUNT, THE MAXIMUM WEIGHT OF THE TV/MONITOR BEING ATTACHED MUST
FOLLOW VESA MIS-D SPECIFICATION AND CANNOT EXCEED 30.8 lb (14 kg).
TV Hardware
M6
4x
M4
4x
M4 x 12 mm
M6 x 35 mm
M8 x 25 mm
M4/M6 x 17 mm M4/M6/M8 x 2.5 mm
M6 x 12 mm
M8 x 50 mm
M4 x 30 mm
M8 x 22 mm M8 x 10 mm
4x
4x
4x
4x
8x
4x
4x
4x
4x
4x
Bekijk gratis de handleiding van OmniMount SC130T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | OmniMount |
| Model | SC130T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1666 MB |
