OmniMount SC130T handleiding
Handleiding
Je bekijkt pagina 10 van 20
10
CONCRETE WALL INSTALLATION
Use the wall template to drill your pilot holes. Remove the tape on the back of the template, level the template, and stick it
into place. You can now drill through the template into the concrete wall using a 3/8" drill bit.
Locate and mark one wood stud. Wood studs are usually 16" or 24" apart. A stud nder is a great tool to use; however, they
aren’t always 100% accurate. A great way to verify a stud location is to tap a thin nail into the wall where you think the stud is.
Do this a number of times to verify the center and edges of the stud.
Use the wall template to drill your pilot holes. Remove the tape on the back of the template, align the holes with your marked
studs, level the template, and stick it into place. You can now drill through the template into the wood studs using a 7/32" drill bit.
WOOD STUD INSTALLATION
WOOD
CONCRETE
Ø 7/32" (5,5 mm)
Ø 3/8" (9,5-10 mm)
2. ATTACHING THE WALL PLATE TO THE WALL
Bekijk gratis de handleiding van OmniMount SC130T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | OmniMount |
| Model | SC130T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1666 MB |
