OmniMount Motion52 handleiding
Handleiding
Je bekijkt pagina 46 van 52
P46
ATTENTION!
Power Loss or interruption DOES NOT delete or clear the memory. User must
use the SETUP / RESET button to clear memory.
If Swivel too far RIGHT or LEFT and hits / makes contact with the wall, the unit
will Stop after 2 seconds.
EN
Step 32 – Remote Control Programming
LEFT SWIVELEN
RIGHT SWIVELEN
TILT UPEN
MEMORY 1:
Hold for 5 Seconds until
LED LIGHT color turns
sold, memory is set
Move to another desired
location and repeat above
step to memorize again.
EN
STEP 1
WALL DETECT RIGHT
Swivel to the closest to the
Wall without
the TV
touching the Wall, leave
about 1” (25mm) of space
recommended, Hold down
Wall Detect for 5 seconds
till LED LIGHT color turns
solid
EN
LED LIGHT
Flashing LED: Transmitting Signal
Solid Color LED: Memory Set or Cancelled
EN
STEP 2
WALL DETECT LEFT
Swivel to the closest to the
Wall without
the TV
touching the Wall, leave
about 1” (25mm) of space
recommended, Hold down
Wall Detect for 5 seconds
till LED LIGHT color turns
solid
EN
SETUP:
Push / Collapse the Wall Mount Flat against
the Wall, Press and Hold for 5 seconds to
set the home position (note: this also clears
all memorized commands)
RESET:
Hold for 5 seconds to clear all
commands and memorize HOME position.
EN
!
CAUTION
ATTENTION! Must set WALL DETECT RIGHT first. Failure to do this may result
in poor performance of Wall Mount. If set LEFT WALL DETECT, please use the
SETUP / RESET to clear memory.
EN
MEMORY 2:
Hold for 5 Seconds until
LED LIGHT color turns
sold, memory is set
Move to another desired
location and repeat above
step to memorize again.
EN
TILT DOWNEN
HOME
This will bring the wall
mount back to the wall of
HOME position that user
setup, if user needs to set
a different Home position,
please refer to SETUP
button above for details.
EN
Bekijk gratis de handleiding van OmniMount Motion52, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | OmniMount |
| Model | Motion52 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15109 MB |
