Olimpia Splendid Unico Air Inverter 25 SF Handleiding (256 Pagina's)

Handleiding

/ 256

Je bekijkt pagina 79 van 256

UNICO AIR INVERTER R32

LED D LED B H

LED C LED A

G

46

EN - 31

ENGLISH

4.3 - DIAGNOSIS, ALARMS AND INCONVENIENCES

4.3.1 - Diagnosis of the inconveniences

It is important for the User to distinguish between functional problems and anomalies in relation to the behaviour

of the appliance as foreseen for its normal operation. Furthermore, the most common problems may easily

be solved through simple operations on behalf of the User (See paragraph 4.3.5 - Anomalies and solutions).

For all the other reports (see paragraph: 4.3.3 - 4.3.4), it is necessary to always

contact the technical assistance service”

Any attempt to repair the appliance by unauthorised personnel will immediately

invalidate any form of guarantee.

4.3.2 - Functional aspects not to be mistaken for anomalies

The following events may occur during normal operation:

a. The compressor does not start up again immediately after a stop (it takes about three minutes

to start again).

- In the operating logic of the appliance a delay between a compressor stop and its successive restart

has been included, so that the compressor itself is protected against activations that are too frequent.

b. Duringtheheatingoperationoftheheatpumpappliances,theowofhotairmayoccursome

minutes after activation of the compressor.

- Shouldthefanstartatthesametimeasthecompressor,fortherstfewminutesitwouldemitcold

air into the room (and this could bother the occupants) since the unit has not yet reached steady

running conditions.

4.3.3 - Console led signals

In the event that the air conditioner is blocked, the LEDs

highlight an alarm signal as per table “TAB1”.

Contact an Olimpia service centre.

H Reset key.

G Infrared receiver.

/ 256

Bekijk gratis de handleiding van Olimpia Splendid Unico Air Inverter 25 SF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.