Olimpia Splendid Unico Air Inverter 25 SF handleiding
Handleiding
Je bekijkt pagina 56 van 256

EN - 8
ENGLISH
2. All personnel in charge of maintenance and people which work in the
surrounding area must be instructed on the type work they are going to
carry out.
3. ThezoneMUSTbecheckedwithaspecicrefrigeratingliquidsdetector
before and during work, so that the technician is aware of potentially
ammable atmospheres. Make sure the detection device of the leaks is
suitableforusewithammablerefrigerants,thenthatitdoesnotproduce
sparksandthatisadequatelysealedorintrinsicallysafe.
4. The leaks electronic detectors may need calibration.
If necessary, calibrate them in a zone free of refrigerant.
5. Make sure the detector is not a potential source of combustion and that it
is suitable for the refrigerant used. The device for detection must be set
at a percentage of the refrigerant LFL and must be calibrated for the used
refrigerant; the appropriate percentage of gas (maximum 25 %) must be
conrmed.
6. Ifthepresenceofaleakissuspected,allopenamesmustberemoved.
Ifauidleakwhichrequiresbrazingisencountered,allrefrigerantmustbe
collected from the system or insulated (by means of shut off valves) in a
part of the system away from the leak. Then, bleed nitrogen without oxygen
(OFN) through the system both before and after the brazing process.
7. In case it is necessary to carry out a hot work on the appliance, IT IS
NECESSARY to have a powder or CO
2
reextinguisheravailable.
8. To carry out a work which includes exposition of pipes which contain or
containedaammablerefrigerant,DONOTusesourcesofcombustion.
Riskofreorexplosion!
9. All sources of combustion (even a lit cigarette) should be kept away from
theplaceinwhichalloperationsduringwhichtheammablerefrigerant
may be released in the surrounding space must be carried out.
10.Makesuretheareaisadequatelyventilatedbeforeinterveninginsidethe
system; a continuous degree of ventilation must be present.
11. DO NOT use means different from those recommended by the manufacturer
in order to speed up the defrosting process or for cleaning.
12. Before any operation, always check that:
• thecondensersareunloaded.
The operation must be carried out safely to avoid the risk of producing
sparks;
• there are no live electrical components and that the cables are not
exposed while loading, recovering or bleeding the system;
• thereiscontinuityinthegroundconnection.
Bekijk gratis de handleiding van Olimpia Splendid Unico Air Inverter 25 SF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Olimpia Splendid |
| Model | Unico Air Inverter 25 SF |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 32009 MB |







