Olimpia Splendid Bi2 Wall TR handleiding

240 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 63 van 240
Bi2 Wall TR
ENGLISH
EN - 21
3.12 - SPECIAL FUNCTIONS
3.12.a - Air sampling
Inheatingorcoolingmodeandwithambienttemperaturehigherorlowerthanthedesiredvalue,thefan
isperiodicallypoweredfor1minuteatminimumspeed.Thisway,thesystemisabletoadequatelykeep
temperatureintheroomundercontrolandtoreactivatefasterincaseofneed.
This function is ONLY active if the unit is installed in high position.
3.12.b - Commands lock
Tolockthekeysonboardthemachine,keepkeys (T1)pressedsimultaneouslyfor5seconds.
Theactivationofthefunctionisveriedbythevisualizationof(BL)onthedisplayeverytimeanykeyis
pressed.
This function can only be activated/deactivated from board the machine.
3.12.c - Water not suitable
Thee󰀨ectiveoperationoftheapplianceincoolingorheatingmodeisalwaysconditionedbytemperature
ofwatercirculatinginsidethesystem.Ifwatertemperaturedoesnotreachavaluesuitablefortheset
mode,soifwateristoohotincoolingmodeortoocoldinheatingmode,thefanmotorremainso󰀨and
theindicatorofthecurrentmode(A5)blinks.
- Thefunctionisactiveincoolingmodeiftheunitisnotthermostaticandifwatertemperatureinthe
batteryishigherthan20°Cfrommorethan5minutes.
Theunitimmediatelyresumesnormaloperationofoneofthetwoconditionsisnotmetanymore.
- Thefunctionactivatesinheatingmodeiftheunitisnotthermostaticandifwatertemperatureinthe
batterydropsunder30°C(thefanstopsimmediately).
Inheatingmode,theunitrestartsnormaloperationonlyiftemperatureishigherthan30°Cforatleast30
seconds
3.12.d - Water probe inhibition
Ifaparticularsystemrequiresit,itispossibletoinhibitthecontroloftheunitonunsuitablewatertemper-
ature.
- Disconnecttheunitfromthepowersupply.
- DisconnectthebatteryprobefromtheconnectorX4
- Switchontheunitandwaitthatthealarm“E3” appears on the display.
- PresskeysT2” and “T3”simultaneouslyforatleast10seconds,atthispointthealarmisdisabled
andthedisplayshowsthedesiredtemperature.
Toreactivatethecontrolofwatertemperature(fromdisconnectedmachine),itisnecessarytoreconnect
the probe.
3.12.e - Display rotation
Iftheinstallationoftheunitrequiresit,itispossibletorotatetemperatureonthedisplay180°bypressing
(T1) and (T3)simultaneouslyforatleast5seconds.
This function can only be activated/deactivated from board the machine.

Bekijk gratis de handleiding van Olimpia Splendid Bi2 Wall TR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkOlimpia Splendid
ModelBi2 Wall TR
CategorieNiet gecategoriseerd
TaalNederlands
Grootte30074 MB