Handleiding
Je bekijkt pagina 48 van 438
Preparations and connecting this machine to your PC
- 48 -
The factory default setting is [Auto].
3. Setting the IP address
If you want to set the machine's IP address to a fixed value, follow the procedure below.
For [Auto], the machine's IP address may change dynamically.
For [IPv4 Address], set a value which is not overlapped to any other networked machines.
If you do not use the IPv6 address, set [DHCPv6] to [Disable].
The following case is taken for example here.
IP address of this machine: 192.168.101.2
Subnet mask: 255.255.255.0
Gateway address: 192.168.101.1
1
Press the scroll button ▼ on the operator panel several times to select [Wireless Setting], and
press «OK».
2
Press ▲ or ▼ to input the admin password, and press «OK».
Administrator Password(P.195)
3
Press ▼ to select [Wireless(Infrastructure) Setting], and press «OK».
"Cannot be used simultaneously with Wireless(Wi-Fi Direct)." will be displayed for about 5 seconds.
4
Press ▲ to select [Enable], and press «OK».
5
Press ▼ to select [Network Setting], and press «OK».
6
Check that [IP Address Set] is selected, and press «OK».
Bekijk gratis de handleiding van Oki B513dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B513dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73129 MB |
