Handleiding
Je bekijkt pagina 45 van 438
Preparations and connecting this machine to your PC
- 45 -
Connection form via a wireless LAN
There are two types of connection forms between this machine and the PC via a wireless LAN. Select the
connection form according to your environment, and prepare what is necessary as per the following table for
the connection.
Wireless LAN (Infrastructure) and wireless LAN (Wi-Fi Direct) cannot be used simultaneously.
Wired LAN1 and wireless LAN can be used at the same time. Please connect wired LAN1 and wireless LAN to
different subnets since the communication may be unstable if they are connected to the same subnet.
Wireless LAN and extended wired LAN cannot be used simultaneously.
Do not place an electric appliance (especially microwave oven or digital cordless telephone) that emits weak
electronic waves near this machine.
Wireless LAN connection may be inferior in communication speed compared to wired LAN connection or USB
connection depending on the environment. When printing large data such as photos, we recommend you to print via
a wired LAN or USB connection.
If detailed settings such as security and server are required, set them from the web page of this machine.
Managing the machine from the web page(P.200)
Form Infrastructure Wi-Fi Direct
Connectio
n image
Descriptio
n
Connect this machine and the wireless terminal (PC,
tablet, smartphone, etc.) via an access point.
Without an access point, connect it directly to the
wireless terminal (e.g. a PC, tablet, smartphone,
etc.).
Required
preparatio
ns
Check the following information and take a note.
Wireless settings of the printer
Auto/Manual setting of the IP address
For manual setting:
IPv4 Address
Subnet Mask
Gateway Address
Check that your wireless LAN access point
supports the following environment.
Standard: IEEE 802.11 a/b/g/n/ac (2.4 Ghz/5 GHz)
Access mode: Infrastructure mode
Check that the wireless LAN access point
supports WPS-PBC (push button) and WPS-
PIN (PIN code).
If WPS (Wi-Fi Protected Setup) is not
supported, check the SSID and encryption key
with the User's Manual enclosed with your
wireless access point.
Check that your wireless terminal supports the
following environment.
Standard: IEEE 802.11 b/g/n (2.4 Ghz)
Security: WPA2-PSK (AES)
Wi-Fi Direct can only be used in the 2.4GHz
band.
Connectio
n method
Connecting via an access point (Infrastructure)(P.46) Connecting directly with this machine (Wi-Fi
Direct)(P.58)
SSID is also called the network name, ESSID or ESS-ID.
Encryption key is also called the network key, security key, password, or pre-shared key (PSK).
Bekijk gratis de handleiding van Oki B513dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B513dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73129 MB |
