Handleiding
Je bekijkt pagina 37 van 438
Preparations and connecting this machine to your PC
- 37 -
Connecting via a wired LAN
You can print by connecting this machine to a PC with a LAN cable. Connect the LAN cable, and set the IP
address or the like on the operator panel.
1-1. Connecting the LAN cable
1
Prepare a LAN cable (category 5e or better, twisted pair, straight) and a hub.
2
Press the power button to power off this machine.
If you are using the extended wired LAN module, please refer to "1-2. Installing the extended wired LAN module
(For wired LAN2)(P.37)".
3
Plug one end of the LAN cable into the network interface connector (LAN1) of this machine.
4
Plug the other end of the LAN cable into the hub.
Next, set network information like the IP address on this machine.
2. Setting the IP address or the like(P.41)
1-2. Installing the extended wired LAN module (For wired LAN2)
ļ Depending on the specific region, the extended wired LAN module may not be installed.
Install it if you want to connect this machine to two different networks with a wired LAN. After installation, you
need to enable the wired LAN module on the operator panel.
This section describes the procedure for installing the extended wired LAN module and enabling the extended
wired LAN module on the operator panel.
Bekijk gratis de handleiding van Oki B513dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B513dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73129 MB |
