Handleiding
Je bekijkt pagina 76 van 438
Basic operations
- 76 -
Paper that is too thin or too thick
Paper with much paper dust
Short grain paper (Do not use for vertical feeding.)
Wet (damp) paper
Paper with curl, curve or wave due to humidity
Paper stuck by static electricity
Paper and envelopes that have been textured, embossed or coated (coated paper, glossy paper)
Paper specially processed with glue, chemicals, etc.
Paper specially processed without heat resistance (230°C)
Paper with holes, perforations, notches, holes for binder
Paper that has irregularities, crushing, burrs, etc. on the paper cut surface
Non-square shaped paper, or paper whose cutting angle is not right
Paper or envelopes with wrinkles, warping, corner bending, waving, creases, tears, etc.
Paper with staples, clips, ribbons, tapes, clasps, etc.
Special paper such as carbon paper, non-carbon paper, thermal paper, and pressure-sensitive paper
Thermal transfer printer paper, ink jet paper, wet PPC paper, copying paper, Japanese paper, etc.
Envelopes sticked with stamps
Envelopes that are too thick
Envelope made of plastic
Double envelopes with inner bags
Envelopes with clasps, buttons or windows
Envelopes sticked with double-sided tape or with adhesive on the flap
Envelopes with water repellency
Paper precautions by type
Plain paper
For thick paper, the toner may stick thinly to the whole paper or the printing may be light.
Partially printed paper
When a printing frame is set, design it with careful considerations of the following variations in the printing
position.
Output position accuracy: ±2 mm; paper slant: ±1 mm/100 mm (except for duplex printing); image
expansion and contraction: ±1 mm/100 mm (except for duplex printing, when the paper weight is 64
g/m
2
)
This machine cannot print over a printed area.
Envelopes
The paper may warp or wrinkle after printing.
The toner may stick thinly to the whole paper or the printing may be light.
The toner may be easily removed.
The printing quality may decline in an area of about 5 mm around the sealing part (of different weights) of
the envelope.
The warps on an envelope may cause poor paper feeding. Use the envelope after correcting warps or
bulges.
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
