Handleiding
Je bekijkt pagina 75 van 438
Basic operations
- 75 -
Media type
Paper size
Media weight
Other conditions
DL
COM-9
COM-10
Monarch
Label
A4
Total weight: 0.1 - 0.2
mm
Labels for electrophotographic printers or
dry PPCs where the surface paper,
adhesive, and backing are not degraded
by heat.
Media with a structure that prevents the
front paper from peeling off from the
backing in the heat fixing process of the
printer.
Media with a structure that prevents the
front paper from peeling off the backing
when the paper is traveling.
Media with a combined weight of 0.1 to
0.2 mm of front paper and backing.
Media whose surface paper covers the
entire backing sheet with no adhesive
sticking out.
Media with no breaks or creases.
Duplex printing is not available.
Letter
Partially printed
paper
Equivalent to plain paper For simplex printing:
60 - 256 g/m
2
For duplex printing:
60 - 163 g/m
2
Media whose ink used for partial printing
is heat resistant and can withstand
230°C.
Colored paper Equivalent to plain paper For simplex printing:
60 - 256 g/m
2
For duplex printing:
60 - 163 g/m
2
Media whose pigment or ink used to
color the paper is heat resistant and can
withstand 230°C.
Media made of electrophotographic
paper with the same features as plain
paper.
If the paper grain direction does not match the paper feeding direction, paper jams may occur.
Printing from the MP tray may cause wrinkles. In this case, feed paper from the paper cassette.
The paper wrapper shows the orientation of the surface. Load paper properly so that the surface is the printing
surface.
After unpacking, rewrap the remaining paper in the wrapping paper and reseal it, or place it in a plastic bag and close
it tightly, and then store it in a low-humidity area.
The paper is wrapped in moisture-proof paper to prevent moisture. Please use the paper as early as possible after
opening its package.
Wrap unused paper in the wrapping paper, and keep it away from moisture absorption as much as possible.
If it is used beyond the normal room temperature (temperature: 17°C to 25°C; humidity: 40% to 60%), the printing
quality may be degraded or problems may occur such as paper jams, wrinkles, curls, and warpage.
Depending on the installation environment of the machine, printing on paper that contains moisture may cause white
steam or water droplets to appear around the paper exit area of the machine. This is not abnormal because the heat
generated when the toner is fixed to the paper evaporates the moisture contained in the paper.
Inapplicable paper
Do not use the following types of paper. Doing so may cause paper jams or malfunction.
Paper with smooth surface, rough paper, and paper with different front and back roughness
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
