Handleiding
Je bekijkt pagina 60 van 438
Preparations and connecting this machine to your PC
- 60 -
enable [Wireless(Wi-Fi Direct)], press «OK» to set [Wireless(Wi-Fi Direct)] to [Enable].
5
Press «CANCEL» to return to the standby screen.
3. Connecting with a device
Input the SSID and password of this machine in the wireless terminal to connect.
1
Press the scroll button ▼ on the operator panel several times to select [Wireless Setting], and
press «OK».
2
Press ▲ or ▼ to input the admin password, and press «OK».
Administrator Password(P.195)
3
Check that [Wireless(Wi-Fi Direct) Setting] is selected, and press «OK».
"Cannot be used simultaneously with wireless(infrastructure)." will be displayed for about 5 seconds.
4
Press ▲ to select [Enable], and press «OK».
5
Press ▼ several times to select [Manual Setup], and then press «OK».
6
Check that [SSID], [Security] and [Password] of this machine are displayed.
The screens shown here are examples, and they may differ from the actual display.
7
Input [SSID] and [Password] of this machine confirmed in Step 6 in the wireless terminal to
connect.
If the wireless terminal is set to obtain the IP address automatically, you can communicate by connecting to this
machine via Wi-Fi Direct and allocating the IPv4 address automatically to the wireless terminal.
The factory default IP address is [192.168.110.100].
If you cannot connect, see "Troubleshooting for wireless LAN connection(P.391)".
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
