Handleiding
Je bekijkt pagina 44 van 438
Preparations and connecting this machine to your PC
- 44 -
4
Check that [Network Information] is selected, and press «OK».
5
Press ▼ to select [Wired(LAN1) Information], and then press «OK».
6
Press ▼ to select [IPv4 Address], and then press «OK».
7
Take a note of the displayed IP address.
8
Start the web browser in your PC.
9
Input "https://(the IP address recorded in Step 7)", and press the «Enter» key.
Connection is successful when the web page of this machine is displayed.
If the web page of this machine is not displayed, the network connection between the PC or other terminals and
this machine has failed.
Check if [IP Address Set], [IPv4 Address], [Subnet Mask] and [Gateway Address] of this machine are set
correctly.
By default, when you are opening the machine's web page, use HTTPS instead of HTTP.
By default, when you are opening the machine's web page, a warning that it may not be a legitimate server will
be displayed in your web browser. Set up the certificate appropriately, or temporarily ignore the warning.
If you cannot access the machine via HTTPS due to an expired certificate or a corrupted certificate, set [HTTPS
Redirection (Web)] to [Disable] from the operator panel, access the web page via HTTP, and reset the HTTPS
settings.
This machine does not support TLS 1.1 or lower. If the web browser you are using only supports TLS 1.1 or
lower, use a web browser that supports TLS 1.2 or higher, or after understanding the security risks, set [HTTPS
Redirection (Web)] to [Disable] from the operator panel and access the web page via HTTP.
Then, go to "Installing software on your PC(P.63)".
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
