Handleiding
Je bekijkt pagina 143 van 438
Printing from a PC
- 143 -
6
Check that [Tray Configuration] is selected, and press «OK».
7
Check that [MPTray Config] is selected, and then press «OK».
8
Check that [Paper Size] is selected, and press «OK».
9
Press ▲ or ▼ several times to select a value that matches the envelopes to be loaded, and
then press «OK». Check that [*] is displayed to the left of the selected setting.
10
Press «OK».
11
Press ▲ or ▼ several times to select [Media Weight], and then press «OK».
12
Press ▲ or ▼ several times to select the paper weight to match the GSM weight of the paper to
be used for the loaded envelope, and then press «OK». Check that [*] is displayed to the left of
the selected setting.
For envelopes made of paper with a GSM weight of 85 g/m
2
, select [Medium].
Setting paper information on the operator panel(P.84)
13
Press «CANCEL» to return to the standby screen.
If you are concerned about wrinkles
After printing, if you are concerned about wrinkles on the envelope, follow the procedure below to change the
position (blue, small) of the envelope lever on the fuser unit, set the paper weight to [Heavy], and print it again.
If you are printing on any other paper than envelopes, press the jam release lever (blue, large) to return the
envelope lever (blue, small) to its original position.
1
Take out the fuser unit by following Steps 2 - 5 of "Replacing the maintenance kit".
Replacing the maintenance kit(P.312)
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
