Handleiding
Je bekijkt pagina 122 van 438
Changing settings from the operator panel
- 122 -
Item
Factory
default
setting
Description
Maintenance Counter Disable Set whether or not to add a Maintenance Report (non-
resettable Counter and non-resettable Consumable
Replacements) to [Usage Report].
[Disable]: Print the resettable Counter and resettable
Consumable Replacements in [Usage Report].
[Enable]: In addition to the resettable Counter and
resettable Consumable Replacements, the Maintenance
Report (non-resettable Counter and non-resettable
Consumable Replacements) is also printed together in
[Usage Report].
It is displayed when [Print Statistics] - [Usage Report] is set
to [Enable].
Reset Main Counter Execute Reset the main counter.
It is displayed when [Print Statistics] - [Usage Report] is set
to [Enable].
Reset Supplies Counter Execute Reset the replacement counter of consumables.
The maintenance counter is not reset.
It is displayed when [Print Statistics] - [Usage Report] is set
to [Enable] and [Maintenance Counter] is set to [Enable].
Account Lockout Lockout Enable Set whether or not to prohibit new authentication for a
certain period of time when authentication with a password
for Print Statistics has failed consecutively.
Lockout Condition 5 times Set the conditions for lockout.
Value range: 1 - 10 times (in increments of 1 time)
It is displayed when [Lockout] is set to [Enable].
Lockout Period 5 minutes Set the period for lockout.
Value range: 1 minute, 5 minutes, 10 minutes, 15 minutes,
30 minutes, and 60 minutes
It is displayed when [Lockout] is set to [Enable].
Password Policy
Minimum Length
10 or 1*
Set the minimum length of the password.
Use Uppercase On or Off* Set whether the password contains at least one upper-case
letter.
Use Lowercase On or Off* Set whether the password contains at least one lower-case
letter.
Use Symbol
Off
Set whether the password contains at least one symbol.
Use digit
Off
Set whether the password contains at least one digit.
Change Password - Set a new password required to enter the Print Statistics
menu.
It is displayed when [Print Statistics] - [Usage Report] is set
to [Enable].
Menus (Calibration)
Item
Factory default
setting
Description
Fuser Temp Adjust
0
Adjust the fuser unit temperature.
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
