Handleiding
Je bekijkt pagina 17 van 110
17
EN
Adjustment of the door hinges
Note:
• If necessary, and if the premises require it, the mounting of the door can be changed. To do this, follow
the following instructions in the given order.
• The following tools are required: Socket wrench or wrench 8 mm, phillips screwdriver, slotted
screwdriver. Due to the uniqueness of the appropriate tools, those are not mentioned separately in
the following instructions.
1. Remove the two plastic covers and put them aside.
2. Hold the door rmly, remove the two screws and pull the top hinge out of the door.
3. Remove the door from the lower hinge pin by gently pulling it upwards. Gently place it on a patted
surface, to avoid damaging it. Remove the lower hinge bracket on the right side of the unit and
remove the leveling foot on the left side. Reverse their positions.
Note: For detailed information see overview illustration
.
Caution
After you have placed the refrigerator upright on its feet, wait for 6 hours before you connect it to the
mains to permit the cooling system to regain full performance.
4. Install the lower hinge on the left side of the refrigerator. Install the adjustable foot on the right side
of the refrigerator. Unscrew also the stopper piece at the bottom of the door, turn it and x it to the
opposite side.
5. Remove the hinge pin from the top hinge and screw it back into the hinge from the other side. Install
the door onto the lower hinge pin, now located on the left side of the appliance.
6. Install the upper hinge and hinge cover on the left side of the unit. Place the plastic cover on the hole
on the right side of the top of the refrigerator to cover the screw holes.
Note:
When installing the door, ensure that the top of the door is level with the top of the cabinet. If the door
is not level, the rubber gasket will not make a good seal with the cabinet which can cause the appliance
to malfunction.
INSTALLING THE DOOR HANDLE
7. Remove the two blind plugs at the desired side of the door.
8. Install the handle with screws provided.
9. Clip the two provided caps onto the screws.
IM_OFZ 34211 A2_190726_V05_HR.indb 17 26/7/19 10:34 am
Bekijk gratis de handleiding van OK OFZ 34211 A2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | OK |
| Model | OFZ 34211 A2 |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 9762 MB |