Handleiding
Je bekijkt pagina 16 van 21
14
CONTROL PANEL AND REMOTE CONTROL
OPERATION
1. Standby: Place the heater on a stable ground and turn on the power. At this time, the heater is
in standby mode. The display screen shows the ambient temperature, and the "°C" is on. (If there
are no other operations, it will enter the off screen state after 3 minutes).
2. Power on : Press the " " button to start the heater, defaults as low heating mode. The
digital display shows the ambient temperature, and the "°C" is on. When you turn off the heater,
it will count down for 30 seconds and blow cool air during this time. Then the heater will enter
standby mode.
3. Mode: when the heater is on, the heater defaults to low heating mode. Press the body control
button " " to enter mode selection, and cycle through "low heating mode → high
heating mode → fan mode → low heating mode ". Press " " button again to
enter high heating mode, with " " displayed on the screen. Press it once more to enter fan
Bekijk gratis de handleiding van Oceanic OCEASFT2000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oceanic |
| Model | OCEASFT2000 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2853 MB |
