Handleiding
Je bekijkt pagina 28 van 35
USE
NOTICE
When the appliance is switched on after disconnection from the main
power supply, it may take up to 12 hours for the correct temperatures
to be reached.
NOTICE
Ensure that all ends of a shelf are level.
Energy saving tips
▶ Make sure the appliance is properly ventilated (see INSTALLATION).
▶ Do not install the appliance in direct sunlight or in the near of heat
sources (e.g. stoves, heaters).
▶ Avoid unnecessarily low temperature in the appliance. The energy
consumption increases the lower the temperature in the appliance
is set.
▶ Allow warm food to cool down before placing it in the appliance.
▶ Open the appliance door as little and as briey as possible.
▶ Do not overll the appliance to avoid obstructing the air ow.
▶ Avoid air within the food packaging.
▶ Keep door seals clean so that the door always closes correctly.
▶ Defreeze frozen food in the fridge storage compartment.
Adjustable shelves
1. The height of the shelves can be ad-
justed to t your storage needs.
2. To relocate a shelf, remove it rst by
uplifting its hind edge ① and pulling it
out ②.
3. To reinstall it, put it on the lugs on
both sides and push it to the most rear-
ward position until the rear of the shelf
is xed inside the slots in the sides.
Removable door racks/bottle holder
1. The door racks can be removed for
cleaning:
2. Place hands on each side of the rack,
lift it upwards ①and pull it out ②.
3. In order to insert the door rack, the
above steps are carried out in reverse
order.
2
28
Bekijk gratis de handleiding van Oceanic OCEARTT90W3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oceanic |
| Model | OCEARTT90W3 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2248 MB |
