Handleiding
Je bekijkt pagina 27 van 47
Page 25 of 44
• If the power cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• The heater must not be located immediately
below a socket-outlet
• WARNINGS ： In order to avoid
overheating, do not cover the heater.
• The device must be powered by a Residual
Current Device (RCD) with a rated operating
differential current of not more than 30 mA.
• Warning: if this appliance is installed in a
bathroom, it must be installed at least 60 cm from
a bath or shower (volume 2), in accordance with
the requirements of the French electrical
installation standard NFC 15 -100.
• The device must be connected to a circuit
independent electric protected by a bipolar circuit
breaker according to the standard electrical
installation NF C 15-100.
• WARNING: The heater must not be used if the
glass panels are damaged.
• Means for disconnection from the supply mains
having a contact separation in all poles must be
incorporated in the fixed wiring in accordance
with the wiring rules.
• With respect to the details of how to install the
appliance onto the wall, refer to the
"INSTALLATION" section.
• Regarding the detailed information on the
connection of the electric cable, refer to the
section "ELECTRICAL CONNECTION".
Bekijk gratis de handleiding van Oceanic OCEAISHGB2000W2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oceanic |
| Model | OCEAISHGB2000W2 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 6538 MB |
