Handleiding
Je bekijkt pagina 29 van 52
!
28
EN
resetting of the thermal cutout, this appliance must not
be supplied through an external switching device, such
as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
• The heater must not be located immediately below a
socket-outlet.
• Means for disconnection having a contact separation in
all poles must be incorporated in the fixed wiring in
accordance with the wiring rules.
• For correct installation on the wall, thanks to refer to
‘Installation on wall’ part.
• Fixed heaters are to be installed so that switches and
other controls cannot be touched by a person in the
bath or shower.
• Connect the two conductors and the pilot wire of the
supply cord to a connection box in respecting the
following polarities:!- Live: Brown!- Neutral: Blue
- Pilot wire: Black
• WARNING: In order to avoid overheating, do not cover
the heater.
Warning: this product shall be installed in the volume 2 or
hors volume only according to the national wiring rules
(For France NF C 15-100)
Note: The below drawing is for reference only.
We suggest you to contact a professional electrician for
assistance.
In the case as of buildings room, a room receiving a bath
or a shower and socket-outlets lower or equal to 32 A the
Bekijk gratis de handleiding van Oceanic OCEAISHC1000W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oceanic |
| Model | OCEAISHC1000W |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 5460 MB |
