Handleiding
Je bekijkt pagina 49 van 55
21
•
Detach the grid.
•
Replace the CF152 charcoal
lter.
REPLACING
THE BULB
Important:
The bulb must be replaced
by the manufacturer, its service
agent or a qualied person.
Always turn off the power
before performing any
operations on the unit. While
handling the bulb, make sure it
is completely cool before direct
contact with your hands.
When handling the bulb,
always use a cloth or gloves
to make sure that perspiration
does not come in contact with
the bulb as this can reduce its
life.
Replacing the lamp:
• Unscrew the two self-tapping
screws ST4 * 8 mm from the
lighting panel. Take the lamp
out of its fastener.
• Remove the 3 screws ST3 *
12 mm from the terminal
block cover, and remove the
wire cover.
• Remove the terminal from
the PCB terminal block,
disconnect the connector
wire, and replace the lamp.
Note: Make sure that the power
is completely turned off before
the operation above.
The ILCOS D code for this
lamp is: DBS-2.5 / 65-H-
120/33
- LED modules - rectangular
lamp
- Maximum power: 2.5 W
- Voltage range: AC 220-240 V
- Dimensions:
Maintenance and cleaning
Bekijk gratis de handleiding van Oceanic OCEAHC180W8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oceanic |
| Model | OCEAHC180W8 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 6816 MB |
