Oceanic OCEACVD2000 handleiding
Handleiding
Je bekijkt pagina 25 van 29
25
Indicators
The heat is on
Degrees Celsius
The shutdown timer is activated
Buttons
Main power switch, switches the heater on/off
Standby, switches the heater on or puts it into standby mode.
Brightness, 50%, 25% or OFF
Shutdown timer, press for three seconds to set a time.
Heat mode, choice of H1, H2 or AF
Increases the value when making settings
Decreases the value when making settings
Instructions for use
1. Plug the appliance to AC 220-240V 50-60Hz socket. Please verify the
rated current of the power socket whether it fits the requirements and
equipped with a safety grounding device; otherwise, replace the socket.
2. Press to switch the heater on/off. The heater will beep and the
standby button will illuminate.
3. Press to switch the heater on or put it into standby mode. The
heater will come on with the latest saved settings. If the temperature of
the room is lower than the temperature on the display, the heat mode
indicator will illuminate and the heater will begin to heat.
Power setting: Press button to set the working power setting, and the relevant
ICON will be shown on the LED display.
H1
H2
AF
Low power
1250W
High power
2000W
Anti-frost mode
7 °C ± 3 °C (cannot be changed).
Bekijk gratis de handleiding van Oceanic OCEACVD2000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oceanic |
| Model | OCEACVD2000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1966 MB |
