Handleiding
Je bekijkt pagina 14 van 53
3. INSTALLATION AND PREPARATIONS FOR USE
13
•
.
The appliance is adjusted for 230V 50Hz electricity. If the mains electricity is different contact
your authorized service
•
•
.
3.4 Gas conversion
:
Changing injectors:
• .
•
•
•
The supply cord should be kept away from hot parts of appliance. Otherwise, the cord may be
damaged, causing short circuit.
The manufacturer declares that it has no responsibility against any kind of damages and losses
that are caused by improper connections that are performed by unauthorized people
Caution: The following procedures must be undertaken by authorized service people.
Your appliance is adjusted to be operated with LPG/NG gas. The gas burners can be adapted to
different types of gas, by replacing the corresponding injectors and adjusting minimum flame length
suitable to the gas in use. For this purpose, following steps should be performed
Cut off the main gas supply and unplug from the electric mains
Remove the burner cap and the adapter(Figure 6).
Unscrew the injectors. For this, use a 7mm spanner(Figure 7).
Replace the injector with the ones from the gas conversion kit, with corresponding diameters
suitable to the type of gas that is going to be used, according to the information chart (which is
also supplied in the gas conversion kit).
Figure 5
•
.
• .
•
• .
•
.
You have to ensure the power cord with suitable insulation to be connected to the power source
during the connection If there is no appropriate earthed electric outlet in accordance with
regulations in the place where the appliance to be installed, contact to our authorized service.
The earthed electric outlet must be close to the appliance.
Do not use an extension cord
The power cord must not touch to the hot surface of the product.
In case the cord is damaged, contact Authorized Service to have it changed
Any wrong electric connection may damage your appliance, as well as endangering your safety,
rendering your guarantee invalid
BROWN
BLUE
YELLOW GREEN
Bekijk gratis de handleiding van Oceanic OCEACTG4IX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oceanic |
| Model | OCEACTG4IX |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5060 MB |
