Handleiding
Je bekijkt pagina 16 van 57
· Before proceeding with the electrical connection, verify that the current carrying capacity of
the system and the socket is adequate for the maximum power rating of the hob.
· Electrical installation of the residence and the electrical current plug in use must be earthed
and conform with safety regulations.
· If there is no dedicated hob circuit and fused switch, they must be installed by a qualified
electrician before the hob is connected.
. Fused switch must be easily accessible once the hob has been installed.
· Do not use adaptors, multiple sockets and/or extension leads.
· This appliance conforms with the requirements ofthe following EEC Directives:
1. Vitroceramic hob EEC/73/23 and 93/68, EEC/89/336 relating to radio interference,
2. EEC/89/109 relating to contact with foods.
· A circuit breaker with a contact opening of at least 3mm must be installed inside the supply
circuit.
· For the knob controlled vitroceramic hob with two heating elements, the cable must be
H05VV-F 3X1,5mm². For the knob controlled vitroceramic hob with one heating elements, the
cable must be H05VV-F 3X1,0mm². You will find the connection diagram shown on the bottom
of your appliance.
INSTALLATION AND PREPARATIONS FOR USE
15
Figure 15
L
N
BROWN
YELLOW+GREEN
BLUE
3.5 Electrical Connection Of Your Hob
Bekijk gratis de handleiding van Oceanic OCEACPM2G2V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oceanic |
| Model | OCEACPM2G2V |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6232 MB |
