Oceanic OCEABH2000W handleiding
Handleiding
Je bekijkt pagina 22 van 35
22
21. Before any operation, check that the voltage of
the device corresponds to the mains voltage
(wall socket 230 volts). To avoid any risk of
electric shock, connect the appliance by fitting
the plugs correctly into the jacks provided for
this purpose.
22. If you need an extension cord, make sure it fits
the power of this unit.
23. As long as the unit is connected to the mains
(wall socket), it is not disconnected from the
power source even if it is turned off. The
appliance must be completely unplugged
before cleaning, service, maintenance or even
moving from one place to another.
24. The socket of the installation must always be
provided with a connection to the ground. If the
power supply is not connected to ground, you
must not connect the device.
25. WARNING: To prevent overheating, do not
cover the heater.
26. This heater is filled with a specific amount of
special oil. Repairs requiring the opening of the
oil tank must only be carried out by the
manufacturer or his service department, which
must be contacted in the event of an oil leak.
Regulations regarding the disposal of oil when
the heater is scrapped must be followed.
Bekijk gratis de handleiding van Oceanic OCEABH2000W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oceanic |
| Model | OCEABH2000W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4720 MB |
