OBH Nordica PerfectMix+ LH811DS0 handleiding
Handleiding
Je bekijkt pagina 53 van 56
PROBLEMS CAUSES SOLUTIONS
Leak at the bottom of the
blender jug
The blender seal (F3)
is not positioned correctly
or is absent
Reposition the seal with the
correct side uppermost (Fig. 11)
and lock the assembled blade
unit (F1+F2+F3) onto the
blender jug correctly (Fig. 1,
Fig. 2 & Fig. 3)
The blade does not turn
easily
Pieces of food are too large
or too hard. Liquid has been
blended that was too hot and has
distorted the seal
Replace the seal with a new
one. Reduce the size or quantity
of ingredients processed. Add
liquid.
YOUR APPLIANCE STILL DOES NOT WORK?
Contact the store of purchase.
OBH Nordica LIMITED GUARANTEE
The Guarantee
OBH Nordica guarantees this product against any manufacturing defect in
materials or workmanship during 2 years within Sweden, Norway, Denmark and
Finland, starting from the initial date of purchase or delivery date.
This manufacturer’s commercial guarantee covers all costs related to restoring
the proven defective product so that it conforms to its original specications,
through the repair or replacement of any defective part and the necessary
labour. At OBH Nordicas choice, a replacement product may be provided
instead of repairing a defective product. OBH Nordicas sole obligation and
your exclusive resolution under this guarantee are limited to such repair or
replacement.
Conditions & Exclusions
OBH Nordica shall not be obliged to repair or replace any product which is
not accompanied by a valid proof of purchase. The defective product may be
returned to the store of purchase.
This guarantee applies only for products purchased and used for domestic
purposes and will not cover any damage which occurs as a result of misuse,
negligence, failure to follow OBH Nordica instructions, or a modication
or unauthorised repair of the product, faulty packaging by the owner or
mishandling by any carrier. It also does not cover normal wear and tear,
maintenance or replacement of consumable parts, or the following:
- using the wrong type of water or consumable
- mechanical damages, overloading
- damages or poor results specically due to wrong voltage or frequency as
stamped on the product ID or specication
- ingress of water, dust or insects into the product
- scaling (any de-scaling must be carried out according to the instructions for
use)
53
Bekijk gratis de handleiding van OBH Nordica PerfectMix+ LH811DS0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | OBH Nordica |
| Model | PerfectMix+ LH811DS0 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 5706 MB |
