NutriBullet Turbo handleiding
Handleiding
Je bekijkt pagina 2 van 15
21
AVOID HEATING AND
OVER-PRESSURIZING CUP:
WARNING! NEVER BLEND
HOT, WARM, OR CARBONATED
INGREDIENTS OR LIQUID IN THE
NUTRIBULLET
®
CUP! SUCH USE
MAY OVER-PRESSURIZE THE
NUTRIBULLET
®
CUP, CAUSING THE
CUP TO SEPARATE VIOLENTLY WHEN
REMOVED FROM THE MOTOR BASE
OR OPENED, WHICH MAY RESULT
IN BODILY INJURY FROM THE HOT
CONTENTS OR EXPOSED BLADES.
• DO NOT blend hot or warm
ingredients.
– Starting with hot or warm
ingredients allows more heat and
pressure to build inside the Cup
when blending. This may cause
the Cup to separate, expelling hot
contents or exposing the Blade, both
of which may cause injury.
– Only blend room- temperature or
refrigerated ingredients (21°C/70°F
or cooler).
• DO NOT blend for more than
one minute.
Important safeguards.
When operating your nutribullet
Turbo
™
Personal Blender, remember:
SAFETY COMES FIRST
WARNING! To avoid the risk of serious injury, death, property damage or damage to
your device carefully read all instructions before operating your nutribullet
Turbo
™
Personal Blender. When using any electrical appliance, basic safety precautions should
always be observed, including the following important information. READ
CAREFULLY AND THOROUGHLY BEFORE OPERATING.
If you let anyone else use your nutribullet
Turbo
™
Personal Blender, make sure that
they understand the health and safety information in this User Guide, as well as any
additional safety or usage instructions provided. Each person using a device should
completely read the User Guide and become familiar with the safe operation of the unit.
– Blending causes ingredients
to heat up, which builds pressure
in the Cup over time. Continuous
blending for more than one minute
may cause the Cup to separate,
exposing the Blade, or expel
heated contents, causing injury.
– DO NOT run for more than 3
consecutive 45-second intervals
to prevent the contents from
overheating and pressurizing.
Allow contents to settle at least 10
to 20 minutes after running multiple
consecutive extraction cycles.
DO NOT attempt to open the Cup
if it feels hot or warm to the touch.
See Cup Caution section for details.
• DO NOT blend anything carbonated
or eervescent — no bubbles.
- Carbonated and eervescent
ingredients (e.g., soda, baking
powder, baking soda, yeast, some
batters, cake mix, dry ice, or
other things that become bubbly)
release gasses that increase
pressure. Pressure from
released gases can cause a
sealed nutribullet
®
Cup to
!
Save these instructions!
FOR HOUSEHOLD USE ONLY
burst, resulting in possible injury
and/or property damage.
Note: Some protein powders
include eervescent ingredients.
Always check the ingredients of
all supplements before adding.
• DO NOT overfill.
- Filling above the MAX line can
result in leakage. The cyclonic
action of the nutribullet
®
requires
space to extract eectively.
Exceeding the MAX line can result
in leakage and may create a
dangerous pressurization which
can cause the Cup and Rapid
Extractor Blade assembly
to separate.
• DO NOT leave blended foods inside
sealed Cup.
– Blended mixtures can spoil
and ferment, increasing pressure
when left inside the Cup.
– Use the To-Go Lid or transfer
to another container for storage
after blending.
CUP CAUTION:
WARNING! NEVER ATTEMPT TO
OPEN A SEALED NUTRIBULLET
®
CUP IF IT FEELS HOT OR WARM TO
THE TOUCH. THE CONTENTS MAY BE
HEATED AND PRESSURIZED, WHICH
CAN CAUSE THE CUP TO VIOLENTLY
SEPARATE WHEN OPENED,
POTENTIALLY RESULTING IN
BODILY INJURY. IF THE CUP
FEELS HOT OR WARM, TAKE THE
FOLLOWING STEPS:
1. LEAVE ALONE, DO NOT OPEN.
Leave the Cup where it is and do not
touch it or allow another individual
to touch. DO NOT attempt to
disengage the Cup from the Motor
Base or separate the Cup from the
Rapid Extractor Blade by applying
heat, force, or prying apart the
components, which may crack
or shatter the Cup and result in
bodily injury.
2. Do not continue to blend.
3. Allow the Cup to cool for at least
30 minutes.
4. After 30 minutes, check if the Cup is
completely cooled. If still warm, allow
to cool more.
5. If cool to the touch, slowly disengage
the Cup from the Motor Base.
6. With the Cup pointed away from
your face and body, use a towel to
slowly untwist the Cup from the Rapid
Extractor Blade and gently release
any residual pressure.
WARNING! IF YOU ARE STILL
UNABLE TO REMOVE THE CUP FROM
THE RAPID EXTRACTOR BLADE,
CONTACT CUSTOMER SERVICE IF
YOU ARE UNABLE TO UNTWIST THE
CUP FROM THE RAPID EXTRACTOR
BLADE, NEVER LEAVE THE SEALED
CONTENTS OUT FOR A PROLONGED
PERIOD OF TIME THE CONTENTS
MAY FERMENT CAUSING THE CUP
TO VIOLENTLY SEPARATE, WHICH
CAN RESULT IN IN BODILY INJURY OR
PROPERTY DAMAGE DISPOSE OF
THE CUP AND CONTENTS PROPERLY
SO YOU OR OTHERS WILL NOT BE
INJURED IF FERMENTATION CAUSES
THE CUP TO SEPARATE
CUP SAFETY:
• Always make sure the Cup is securely
locked on the Motor Base before
blending. The motor will not turn
on unless the Cup is set in the
locked position.
• Do not exceed the MAX line.
Exceeding the MAX line can result
in leakage.
• Do not remove the Cup while the unit
is in operation.
• Periodically inspect your nutribullet
Turbo
™
Personal Blender components
for damage or wear that may impair
proper function or create a
safety hazard.
Bekijk gratis de handleiding van NutriBullet Turbo, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NutriBullet |
| Model | Turbo |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 1639 MB |
