NutriBullet Limitless handleiding

Handleiding

12345678910111213141516/ 16

Afdrukken

Je bekijkt pagina 8 van 16

If using the Chopping Blade

Prepare food (cut into smaller pieces, remove seeds, etc.) and place into the Work Bowl.

1 Place the Work Bowl, with

the Chopping Blade

attached, on a clean, dry,

flat surface like a

countertop. Refer to the

assembly instructions

on page 13 for how to

properly attach the

Chopping Blade.

2 Prepare food (cut into

smaller pieces, remove

seeds, etc.) and place into

the Work Bowl. Do not

overload Work Bowl with

food. If you are using liquid

ingredients do not fill past

the LIQUID MAX line.

NOTE: Make sure the Chopping

Blade has been attached to the

Work Bowl BEFORE adding

food to the Work Bowl.

Using the Chopping Blade.

The Chopping Blade is a versatile blade that can be used to chop,

mix, mince, or purée foods.

Place the Work Bowl Lid on top of the Work Bowl.

4 Place the Work Bowl, with

lid attached, onto the Motor

Base. Turn the Work Bowl

clockwise to lock into place.

You should hear a click

when the Work Bowl is

properly locked into place.

3 Place the Work Bowl Lid

on top of the Work Bowl. Turn

the lid clockwise, lining up

the markings on the lid and

handle, to lock into place.

Place the Food Pusher into

the Feed Chute.

NOTE: The motor will not run unless

the lid is locked into place.

Place the Work Bowl, with lid attached, onto the Motor Base

5b If you need to add liquid

while processing, lift

the Pusher and drizzle

liquid through the

Feed Chute.

NOTE: Do not fill liquid ingredients

past the LIQUID MAX line.

5a Plug in the unit, slide

the toggle to the ON or

PULSE position to start

processing food.

If you need to add liquid while processing,

lift the Pusher and drizzle liquid through the feed chute.

6 When you’re finished,

slide the toggle to the OFF

position. Wait until the

Chopping Blade has come

to a complete stop. Remove

the Work Bowl by turning

the handle counterclockwise

to unlock it from the Motor

Base. Lift the Work Bowl up

o the base and set it on a

flat surface.

7 Remove the Work Bowl

Lid from the Work

Bowl by turning the lid

counterclockwise to unlock.

Carefully remove the lid

and set it aside.

Place the Work Bowl Lid on top of the Work Bowl.

Place the Work Bowl, with lid attached, onto the Motor Base

ON

control panel - o

Plug in the unit, slide the toggle to the ON position to start processing food.

1514

12345678910111213141516/ 16

Bekijk gratis de handleiding van NutriBullet Limitless, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd