NutriBullet Flex handleiding
Handleiding
Je bekijkt pagina 3 van 467
43
Save these instructions!
FOR HOUSEHOLD USE ONLY
!
BLADE SAFETY
WARNING!
BLADES ARE SHARP!
HANDLE WITH CARE TO AVOID
BODILY INJURY.
• Do not touch the sharp edges of
the blades.
• Do not place hands or fingers near
• the blades when attaching the Blade
• Block to the Cup.
• Handle with care when washing the
Blade Block by hand.
• Always ax the Blade Block to the
Blending Cup before attaching to
the Motor Base.
• Do not store the Blade Block with the
blades exposed. Always secure the
Blade Block to the Blending Cup, and
assemble to the Motor Base.
WARNING! NEVER PUT YOUR HANDS
INSIDE THE CUP OR NEAR THE BLADE
WHEN THE UNIT IS RUNNING.
• Do not remove the Cup or open the
Sip Lid with Carry Loop until the blades
have completely stopped. Blades can
still activate when the Sip Lid with
Carry Loop is removed or opened. Not
following these instructions may result
in bodily injury, property damage, or
damage to your unit.
BLADE CARE AND CAUTION
WARNING!
DISCONTINUE USE IF THE
BLADE IS BENT OR DAMAGED.
• Routinely inspect the blades for
damage, and if detected, contact
Customer Service for replacement.
• Remove all utensils and non-food
items from Cup before operating as
it may result in bodily injury or
damage to the blade and unit.
• Do not blend stone fruit in this
appliance unless pits/seeds have
been removed. Hard ingredients may
damage the blade.
HEAT AND PRESSURE SAFETY
WARNING!
DO NOT BLEND
HOT, WARM, CARBONATED, OR
EFFERVESCENT INGREDIENTS, WHICH
MAY CAUSE SPLATTERING OF HOT
LIQUIDS WHEN OPENING THE SIP LID
WITH CARRY LOOP.
• Such use may over-pressurize the
nutribullet
®
Cup, causing the Cup
or Sip Lid with Carry Loop to
separate from the Motor Base while
operating. This may result in bodily
injury from expelling hot content or
exposed blades.
• Only blend room-temperature
or refrigerated ingredients
(21°C/70°F or cooler).
• Carbonated and eervescent
ingredients (e.g., soda, baking powder,
baking soda, yeast, some batters,
cake mix, dry ice, or other things that
become bubbly) release gasses that
increase pressure within the Cup
when blending. Some protein powders
include eervescent ingredients.
Always check the ingredients of all
supplements before blending.
ALWAYS CHECK ALL INGREDIENTS
BEFORE BLENDING.
WARNING! DO NOT BLEND CONTENTS
FOR MORE THAN ONE MINUTE. DO NOT
RUN CONSECUTIVE BLENDING CYCLES
THAT EXCEED ONE MINUTE TOTAL.
• Blending causes ingredients to heat
up, which builds pressure in the Cup over
time. Continuous blending for more than
one minute may cause the Cup or Sip Lid
with Carry Loop to separate, exposing
the blade or expelling heated contents
and causing injury.
WARNING! DO NOT LEAVE
BLENDED FOODS IN A SEALED
CUP FOR PROLONGED PERIODS
OF TIME.
• Blended mixtures can spoil and
ferment, increasing pressure when left
inside the Cup. This may cause the
Cup or Sip Lid with Carry Loop to
separate from the Motor Base, which
may result in bodily injury.
• Only access the blended contents
through the Sip Spout by carefully
opening the Sip Lid with Carry Loop
after blending.
Important safeguards.
When operating your nutribullet Flex
™
Portable Blender, remember:
SAFETY COMES FIRST.
Warning! To avoid the risk of serious injury or damage, carefully read all instructions
before operating your nutribullet Flex
™
Portable Blender. Basic safety precautions,
including the following important information, should always be observed when
using any electrical appliance.
If you let anyone else use your nutribullet Flex
™
Portable Blender, ensure they
understand the health and safety information in this User Guide and any additional
safety or usage instructions. Each person using a device should completely read the
User Guide to become familiar with the safe operation of the unit.
CUP CAUTION
• If the Cup is hot or warm to the touch,
the contents may be HEATED and
PRESSURIZED. If this happens, take
these steps:
• LEAVE ALONE, DO NOT OPEN. Leave
the Cup where it is and do not touch
it or allow others to touch it. NEVER
attempt to separate the Cup from the
Motor Base as this can result in
bodily injury.
• Do not blend again.
• Allow the Cup to cool for at least 30
minutes. If still warm, allow for more
cooling time.
• Once cool to the touch, slowly open the
Sip Lid with Carry Loop, while pointing
away from your face and body. Pour
contents out into a separate vessel.
CUP SAFETY
Proper Cup use is important to safely
operate your nutribullet Flex
™
Portable
Blender. Using the Cup inconsistent with
these instructions may result in bodily
injury, property damage, or damage to
your unit.
• ALWAYS make sure the Cup, Blade
Block, and Motor Base are securely
aligned before blending. The motor
will not turn on unless the Cup is
situated in the locked position.
• ONLY operate the unit with the Sip
Lid with Carry Loop cover in place.
• DO NOT exceed the MAX line.
Exceeding the MAX line can result in
leakage or stop page of the blade.
• DO NOT remove the Cup or Sip Lid
with Carry Loop while the unit is in
operation.
• DO NOT overfill the Cup with ice as
it may stop the blades from turning,
resulting in damage to the unit or
injury. Always use a sucient amount
of liquid before blending.
• Do not use the Cup if you detect
cracking, cloudiness, or other damage.
• Only order replacement parts from
nutribullet.com or by contacting
Customer Service.
Bekijk gratis de handleiding van NutriBullet Flex, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NutriBullet |
| Model | Flex |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 50202 MB |
