NutriBullet Flex handleiding
Handleiding
Je bekijkt pagina 15 van 467
2827
Care & maintenance.
STEP 1:
Always make sure the nutribullet
Flex
™
Portable Blender is turned
off after each use.
PRO TIP: Before powering down, check
the remaining battery state using the
LED Battery Bar. Is it time to charge?
STEP 2:
Twist off the Blade Block in a
clockwise motion, avoiding
contact with the blades.
Twist off the Sip Lid with Carry
Loop in a counter-clockwise
motion. The Blade Block, Sip Lid
with Carry Loop, and Blending
Cup are dishwasher-safe.* You
can also hand-wash with warm,
soapy water and rinse clean.
If ingredient contact with Motor
Base occurs, wipe clean with
a damp cloth. The Silicone
Charge Port Cover protects
against liquid ingress.
NOTE: The Motor Base is NOT
dishwasher safe.
*However, the Cup, Blade Block and Sip
Lid with Carry Loop can be washed in
the top rack of your dishwasher without
the sanitize cycle.
NOTE: If the Sip Lid with Carry Loop
gasket becomes displaced during or
after cleaning or drying, remove any
excess moisture from the gasket area
and gently guide it back into place.
NOTE: Never submerge or run the Motor
Base under water.
When traveling by air,
check the guidelines outlined
by TSA regarding safe
transport. Always check
with your travel carrier for
specifications regarding blades
and lithium-ion batteries.
For more information, refer
to our website nutribullet.com.
Traveling with the
nutribullet Flex
™
.
WARNING! When traveling by
air, carefully remove the
Blade Block, as the blades
are sharp. Exercise caution
and securely cover and wrap
the Blade Block to prevent
accidental touching of the
blades when packing and
unpacking in your luggage.
The Motor Base should be
carried in your carry-on bag.
Replacement parts.
To order additional parts
and accessories, please visit
our website at nutribullet.com/
shop/accessories.
WARNING! Do not touch
the blades! They are
very sharp.
WARNING! Do not blend hot
or warm liquids in the
590 ml Cup. Pressure may
cause splattering of hot
liquids when opening
the Sip Lid with Carry Loop.
WARNING! Never submerge
the Motor Base in water or
any other liquid.
WARNING! BLADES ARE
SHARP. Exercise caution
when attaching or
detaching the Blade Block
to prevent accidental
touching of the blades.
NEVER leave the Blade
Block exposed when
storing. Always attach the
Cup and Sip Lid with Carry
Loop to the Blade Block
when storing.
STEP 3:
Always store your nutribullet
Flex
™
Portable Blender in a safe
place. Ensure your blender is
upright, with the Blade Block
secured to the Blending Cup
to prevent blade exposure. Do
not stack objects on top of the
blender when storing.
PRO TIP: A fully assembled
Portable Blender is more compact
in your cupboard!
Bekijk gratis de handleiding van NutriBullet Flex, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NutriBullet |
| Model | Flex |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 50202 MB |
