Nubert nuConnect trX handleiding

Handleiding

123456789101112131415161718192021222324/ 24

Afdrukken

Je bekijkt pagina 19 van 24

nuConnect trX 19 07/2020 EN

– room-correction software of the AVR.

–

The speakers, connected via the trX, need to be set at a relatively high volume. This

is normal and does not impact performance.

Connecting your TV wirelessly to a nuConnect ampX

Devices Transmitter: nuConnect trX connected to the

(examples) optical output of your TV

Receiver: nuConnect ampX

You can transmit the sound from your TV to your nuConnect ampX using the trX.

• Connect the trX to the optical output of your TV and configure it as a transmitter

(optical in,

pink LED) and pair it with the ampX.

Note:

– The ampX must configured as wls slave.

– A direct connection to nuPro X speakers is not recommended, as these do not

provide control functions in slave mode.

Connecting your PC wirelessly to a Nubert X-series Soundbase

Devices Transmitter: nuConnect trX connected to the USB port of a PC

(examples) Receiver: nuPro XS-7500

You can use the trX to play the music stored on your PC on your Soundbase.

• Connect the trX to a USB port on your PC.

• Configure the nuConnect trX as the transmitter (USB-DAC,

white LED) and

pair it with your Soundbase (setup / wls slave). You can still use and operate your

Soundbase normally. To listen to music from your PC, select the wireless input

on the Soundbase.

Note:

Instead of the Soundbase, you can connect and use the nuConnect ampX in the

same way.

123456789101112131415161718192021222324/ 24

Bekijk gratis de handleiding van Nubert nuConnect trX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd