Nubert nuConnect trX handleiding

Handleiding

123456789101112131415161718192021222324/ 24

Afdrukken

Je bekijkt pagina 12 van 24

nuConnect trX 12 07/2020 EN

Concept

The nuConnect trX is a so-called transceiver, meaning it can be configured as either

a transmitter or a receiver, depending on application. To create a completely wire-

less chain using only the trX, you need two trX’s: One configured as a transmitter,

one configured as a receiver.

When used as part of the Nubert X-Connect system, the trX is compatible with a

variety of speakers and devices, e.g. nuPro X and XS speakers, nuSub XW subwoof-

ers and the nuConnect ampX. When used together with any of these speakers and

devices you will normally need only one trX.

The nuConnect trX can be used in many different ways and configurations – read

more about some of the typical applications on the backside of this manual.

1. Placement

Make sure the nuConnect trX is placed on a level, solid surface and that it has

enough free space around it to allow air to circulate freely.

2. Connections

Connect all cables before you start configuring the trX. Use the supplied cables and

adapters and connect the signal cables first.

You have the following options:

Transmitter mode – connections are inputs:

– Line in (3.5 mm combo-jack)

– Optical in (3.5 mm combo-jack)

– USB in (USB-C socket)

Receiver mode – connections are outputs:

– Line out (3.5 mm combo-jack)

– USB Port out (USB-C socket)

123456789101112131415161718192021222324/ 24

Bekijk gratis de handleiding van Nubert nuConnect trX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd