NovaStar NovaCLB Screen V6.0 handleiding
Handleiding
Je bekijkt pagina 12 van 87
NovaCLB-Screen Full-Screen Calibration System
User Manual
www.novastar.tech
8
2. Screen Type
"Single Screen" and "Combine Screen" are supported.
− Single screen: Refers to a screen configured on NovaLCT.
− Combine screen: Refers to a large screen that combines the screes configured on NovaLCT through
"Multiple-screen Management".
3. Screen Resolution
The resolution of display is the width and height in the pixel level.
After NovaCLB-Screen is connected with NovaLCT or NovaPro successfully, the bottom of the interface
will show display count and the corresponding resolution of connected NovaLCTor NovaPro. Users could
choose display number as needed, the default value is the first one.
4. Module Size
Check “Module size same” and set the module width and module height of module if the size of all
modules are same. The function of Seam Brightness Calibration will not be supported if the size of
modules are not same. This will require another seam correction method (correction based on pixel).
5. Calibration Database
A new database can be created or an existing database can be loaded to store the information like
calibration coefficients, calibration time, screen size, etc. It shall be kept properly.
In combined-screen mode, newly created database contains the database of each single screen (named
by the sequence number of the com port and screen), which makes it convenient to maintain in future.
XI'AN NOVASTAR TECH CO.,LTD.
Bekijk gratis de handleiding van NovaStar NovaCLB Screen V6.0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NovaStar |
| Model | NovaCLB Screen V6.0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23121 MB |
