NovaStar MBOX600 Pro handleiding
Handleiding
Je bekijkt pagina 13 van 36
MBOX600 Pro Industrial Controller User Manual
www.novastar.tech
11
Custom: Customize the zoom width and height. (Width and height range is from
64 to 4096. The width must be set to an even number, and width × height ≤ 2.6
million.)
Set the redundant backup information and click Apply.
New: Create a backup relationship.
Edit: Edit the serial number of the master and backup outputs.
Delete: Delete the backup relationship.
Screen Connection
Configure the cabinet topological to complete the logical connection of cabinets.
Prerequisites
The cabinet supports free connection.
The top-left corner of the canvas is at coordinates (0, 0).
When configuring redundant backup, it is recommended to use a loop connection of
cabinets and complete the redundancy settings before connecting cabinets.
Step 1 From the navigation bar on the left, choose Screen Configuration.
Step 2 Select the Screen Connection tab.
Step 3 Turn on Mapping to view the actual connection and then complete cabinet connection
according to the actual information.
Step 4 At the bottom of the page, select an output Ethernet port and drag the corresponding
number of cabinets to the canvas.
The cabinets will be automatically connected when you are adding them.
Step 5 Select another Ethernet port and continue adding cabinets until all cabinets are connected.
Bekijk gratis de handleiding van NovaStar MBOX600 Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NovaStar |
| Model | MBOX600 Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4977 MB |
