NovaStar KU20 handleiding
Handleiding
Je bekijkt pagina 8 van 29
KU20 LED Display Controller User Manual
www.novastar.tech
5
4 Home Screen
After the device is powered on, the home screen is displayed as follows. On the home screen, press the knob to
enter the main menu screen.
Figure 4-1 Home screen
The home screen is shown in Figure 4-1 and the home screen descriptions are shown in Table 4-1.
Home screen descriptions
Area
Content
Description
Top line
KU20 I Send-Only
Controller
The device name and working mode
The device buttons are locked. This icon is not displayed when the buttons
are unlocked.
The buttons will be locked only in the following situations:
Hold down the knob and BACK button simultaneously for 5s or longer.
Operate and control the device in VMP software.
The connection status of the Ethernet ports
Blue: Connected
Gray: Disconnected
192.168.0.10
The device IP address
For related operations, please refer to 7.2 Configure Communication
Settings.
Input
HDMI, Internal
The device input source type and status
Green: The signal is accessed normally.
Blue: The signal is accessed normally, but not used.
Red: The signal is abnormal.
Gray: The signal is abnormal and not used.
For the input source settings, please refer to 5.1.1 Set Input Source.
Internal
1920*1080@60.00Hz
The resolution and frame rate of the currently available input source
For the resolution and frame rate settings, please refer to 6.1.2 Set
Resolution and Frame Rate.
Bekijk gratis de handleiding van NovaStar KU20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NovaStar |
| Model | KU20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3317 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 2100 g |
| Breedte | 289.56 mm |
| Diepte | 254 mm |
| Hoogte | 50.8 mm |
