NovaStar Kompass FX3 handleiding
Handleiding
Je bekijkt pagina 44 van 127
Kompass FX3 Multimedia Playback Software User Manual
www.novastar.tech
43
Step 2 Click at the bottom-left corner or right click the blank area and select Add to open the
Edit Control Command window.
Figure 5-24 Add control commands
Step 3 Enter the control command name next to Name.
Step 4 Enter the splicer information.
1. Select the connected splicer next to Select Device. The supported devices include the video
wall splicer and intelligent controller.
2. Enter the splicer IP address next to Device IP.
3. Enter the port number for the external control next to Port Number.
Step 5 Configure the control command.
1. Select the control command type next to Command Type.
2. Enter the control command value next to Value. For the control command values, please
refer the control protocol of the corresponding splicer.
Step 6 Click OK to complete the settings.
Each control command is a media file.
The playback duration of the command media is fixed to 3s. If a program has the command
media only, the output will be black for 3s.
Bekijk gratis de handleiding van NovaStar Kompass FX3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NovaStar |
| Model | Kompass FX3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16939 MB |
