NovaStar H9 handleiding
Handleiding
Je bekijkt pagina 8 van 95
H Series Video Wall Splicers User Manual
www.novastar.tech
5
Notes
When an H series device is connected directly to a control PC, the device and control PC must be on the
same network segment and their IP addresses cannot conflict. For example, if the device IP address is
192.168.0.10, the IP address of the control PC must be 192.168.0.X and X cannot be 10.
When an H series device is connected to a control PC using a router or switch, you must set to
automatically get the IP address, and select Obtain an IP address automatically for the network settings
on the control PC.
a. Go to Settings > Communication from the home screen to enter the network settings screen.
b. Click the IP Settings tab to enter the IP settings screen.
c. Set the mode to Automatic.
d. Click Main at the top left to return to the home screen and the current device IP address appears at the
top right.
e. Select Obtain an IP address automatically on the Internet protocol properties window on the control
PC. The router or switch will assign the IP addresses to the device and control PC automatically.
Operating Procedure
Step 1 Open the suggested web browser on your computer, enter the device IP address in the address bar, and then
press Enter to jump to the login interface for the Web page for the H series devices.
Figure 2-3 Web login page
Step 2 Enter the user name and password, and click Login to log in to the Web page.
The default user name and password are both "admin".
Bekijk gratis de handleiding van NovaStar H9, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NovaStar |
| Model | H9 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17657 MB |
