NovaStar H9 handleiding
Handleiding
Je bekijkt pagina 15 van 95
H Series Video Wall Splicers User Manual
www.novastar.tech
12
Freeze or unfreeze the layer image by clicking .
Display or undisplay the layer playback on the Web page by clicking / .
When the IPC signal is used as the layer input source, click at the top right corner of the layer to view
the detailed decoding parameters and stream parameters.
When there are multiple overlapping layers, you can adjust the layer priorities.
: Bring the selected layer to the front, and the layer image will be displayed completely.
: Send the selected layer to the back, and the layer will be partially covered by other
overlapping layers.
: Bring the selected layer forward.
: Send the selected layer backward.
Set whether to flip the layer image. Three options are provided as follows.
Disable: Do not flip the layer image.
: Flip the layer image horizontally.
: Flip the layer image vertically.
: Flip the layer image horizontally and vertically.
Figure 4-2 Layer flipping
Click Layout to add and arrange multiple layers, and then all the added layers will fill the whole screen
according to the layout you selected. The layout options are 2×2, 3×3 and 4×4.
Click Clear to quickly clear all the added layers.
Bekijk gratis de handleiding van NovaStar H9, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NovaStar |
| Model | H9 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17657 MB |
