Nord Stage 4 handleiding
Handleiding
Je bekijkt pagina 61 van 76
11. MENUS | 61
Organ Layers via incoming MIDI. Use the soft buttons to switch between
settings for Organ A and B respectively.
Use the Sect (Section) On setting to address both Layers of the Organ
Section on the channel set for Layer A. The Layer B arrow (←) indicates
that the Layer A setting is used for B as well.
Range A: 1-16, Off (Default Off)
Range B: 1-16, Off, ← (Default Off)
Range Sect: On, Off (Default)
4 - PIANO CHANNEL
Use this setting to determine the MIDI channel for controlling the two
Piano Layers via incoming MIDI. Use the soft buttons to switch between
settings for Piano A and B respectively.
Use the Sect (Section) On setting to address both Layers of the Piano
Section on the channel set for Layer A. The Layer B arrow (←) indicates
that the Layer A setting is used for B as well.
Range A: 1-16, Off (Default Off)
Range B: 1-16, Off, ← (Default Off)
Range Sect: On, Off (Default)
5 - SYNTH CHANNEL
Use this setting to determine the MIDI channel for controlling the three
Synth Layers via incoming MIDI. Use the soft buttons to switch between
settings for Synth A, B and C respectively.
Use the Sect (Section) On setting to address all Layers of the Synth
Section on the channel set for Layer A. The Layer B and C arrows (←)
indicates that the Layer A setting is used for B and C as well.
Range A: 1-16, Off (Default Off)
Range B: 1-16, Off, ← (Default Off)
Range C: 1-16, Off, ← (Default Off)
Range Sect: On, Off (Default)
6 - EXTERN CHANNEL
This sets the transmitting MIDI channel for Synth Layers A, B and C set
to Extern Mode. Use the soft buttons to switch between settings for
Extern A, B and C respectively. Note that this is a global setting which
affects the Extern MIDI channels regardless of selected Program.
Range A, B and C: 1-16, Off (Default A=13, B=14, C=15)
7 - CONTROL / NRPN / DEVICE MODE
TYPE
Certain panel controls, especially those that utilize the display, such
as Synth Vibrato, Arpeggiator and LFO use NRPN messaging rather
than standard Control Change to achieve their functionality. To achieve
full functionality when operating the Nord Stage 4 in Local Control Off
mode, make sure that this setting is “CC & NRPN”.
Range: CC, CC & NRPN (Default)
CTRL
This allows you to set if you want your Nord Stage 4 to transmit and/or
receive MIDI CC and NRPN Messages or not on the Global channel
Range: Off (Default), Send, Receive, Send & Receive
DEV (DEVICE)
This allows for setting whether the Nord Stage 4 should transmit and/
or receive Device MIDI Messages or not on the Global channel. Devices
refer to physical physical controllers that generate and send MIDI but are
excluded from the Control Change filtering. These are:
• Pitch Bend
• Modulation Wheel
• Aftertouch
• Sustain Pedal
• Control Pedal
• Swell Pedal
• Volume (Swell set to Volume)
Range: Off, Send, Receive, Send & Receive (Default)
8 - PROGRAM CHANGE MODE
PC (PROGRAM CHANGE)
This setting determines whether your Nord Stage 4 transmits and/or
receives MIDI program Change Messages, on the Global channel.
i This setting does not affect Program Change messaging on the
Extern channels.
Range: Off, Send, Receive, Send & Receive (Default)
PC EXT (PROGRAM CHANGE EXTENDED)
This setting determines whether Program Change and Bank Select
messages are sent and/or received for the Preset Library banks.
Range: Off, Send, Receive, Send & Receive (Default)
9 - TRANSPOSE MIDI AT
When set to In, any active transpose value (global and/or set per
program) will not be applied to the outgoing MIDI stream, but only to
incoming MIDI data. If set to Out, any active transpose value will affect
sent MIDI notes but not incoming ones.
Range: In (Default), Out
10 - MIDI OVERVIEW
The MIDI Overview page shows the current MIDI settings, and allows for
changing any of these settings – from a single page. Use the Page
buttons to focus a MIDI setting and the dial to change its value.
2 Off
Global
Aux KB
Ctrl
Dev
3
4 5 6
1
16
13 14 15
A B C
MIDI OVERVIEW 10/10
SND
RCV
SND
RCV
EX
Bekijk gratis de handleiding van Nord Stage 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Stage 4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10906 MB |
