Nord Stage 4 handleiding
Handleiding
Je bekijkt pagina 36 van 76
36 | NORD STAGE 4 USER MANUAL OS V1.4X
KB HOLD
In KB HOLD (Keyboard Hold) mode, notes keep sounding
even if all fingers are lifted from the keys. This is useful
both for keeping an arpeggio running without keeping
keys pressed down, or for having chords or drones
sustained while playing something else using both hands.
By default KB Hold affects all Layers of the Synth Section. If a Layer
should not be included in the KB Hold functionality, press EXCLUDE
(Shift+KB Hold) for that Layer.
l When KB Hold is turned On, its LED remains lit even if the Synth
Section has been turned Off. This is useful when switching between
Layer Scenes where the Synth is Off for one of them, or in other
instances where held notes persist after the Synth Section has
been turned Off.
VIBRATO
VIBRATO modulates the pitch of the oscillator to
produce natural sounding vibrato effects.
There are five methods for controlling the Synth
Vibrato available from the Selector button in the
Vibrato section:
• When set to ON the Vibrato will be applied as soon as a note is
played.
• In DLY (Delay) mode the vibrato is introduced a short amount of time
after a note is played. The Vibrato amount for the Delay modes is set
in the Vibrato Menu, along with the rate for all Vibrato modes. Read
more further down.
• When WHL is selected, the vibrato amount is controlled with the
Modulation Wheel.
• If Aftertouch – A.T. – is selected, vibrato is controlled by pressing down
held notes on the keyboard.
• In PED (Pedal) mode the Vibrato is controlled by a foot switch or the
left or middle pedal of a Nord Triple Pedal, as defined in the PEDAL
menu. Read more on page 58.
VIBRATO MENU
The Vibrato MENU provides settings for Rate, Amount and Dly Time
(Delay Time), using the three dials below the Synth display. The Rate
parameter can be set to values between 2.0 and 8.0 Hz while Amount
ranges from 0 to 10.
The Delay Time parameter has four options: 0.2, 0.7, 1.2 or 2.0
seconds. Note that this parameter is only relevant if the DLY mode is
selected on the panel.
VIBRATO AND SAMPLES
Samples from the Nord Sample Library 4 come with predefined settings
which determine the exact nature of the Vibrato.
In general the Vibrato for a sample is designed to sound as realistic
and natural as possible, for any given instrument type. This means that
Vibrato Rate will be set to a preset value when a Sample is loaded with
its preset settings, and that the Vibrato Amount will provide access to
different ranges and have different effect depending on the settings for
that specific sample.
KB SYNC
In KB SYNC mode (Shift+Arp Run), the arpeggiator or gate will be
reset any time a new note is played after all keys have been lifted. With
keyboard sync off, any new notes played while the arpeggio or gate is
running will conform to the “grid” of the current tempo setting.
When MST CLK is active, this KB Sync parameter determines whether
the Master Clock is reset. This affects all parameters synced to the
Master Clock in the entire program – for instance the LFO or Delay.
Read more about the Master Clock and its KB Sync options on page
39.
l Note that you can choose which layer or layers should reset the
Master Clock when played, by setting the KB Sync parameter for
each Layer accordingly. For instance, an arpeggio sound on the
left side of a split could reset the clock when played, while a lead
sound on the right side of the split does not.
SOUND INIT
Pressing SOUND INIT (Shift+Waveform) allows for initializing all
synthesizer parameters except for the Synth Mode and selected
waveform/sample, useful for starting from a “clean slate” when
programming sounds. This operation includes sample preset values,
which are reset to their defaults.
i The Sound Init operation can be undone by pressing UNDO.
DLY TIME
5.5 Hz 5.0
Pure Saw
VIBRATO
2.0 s
0.2 s
0.7 s
1.2 s
AMOUNT
RATE
Bekijk gratis de handleiding van Nord Stage 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Stage 4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10906 MB |
